| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318 |
- /* armdefs.h -- ARMulator common definitions: ARM6 Instruction Emulator.
- Copyright (C) 1994 Advanced RISC Machines Ltd.
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
- #pragma once
- #include <unordered_map>
- #include "common/common_types.h"
- #include "core/arm/skyeye_common/arm_regformat.h"
- #define BITS(s, a, b) ((s << ((sizeof(s) * 8 - 1) - b)) >> (sizeof(s) * 8 - b + a - 1))
- #define BIT(s, n) ((s >> (n)) & 1)
- // Signal levels
- enum {
- LOW = 0,
- HIGH = 1,
- LOWHIGH = 1,
- HIGHLOW = 2
- };
- // Cache types
- enum {
- NONCACHE = 0,
- DATACACHE = 1,
- INSTCACHE = 2,
- };
- // Abort models
- enum {
- ABORT_BASE_RESTORED = 0,
- ABORT_EARLY = 1,
- ABORT_BASE_UPDATED = 2
- };
- #define POS(i) ( (~(i)) >> 31 )
- #define NEG(i) ( (i) >> 31 )
- typedef u64 ARMdword; // must be 64 bits wide
- typedef u32 ARMword; // must be 32 bits wide
- typedef u16 ARMhword; // must be 16 bits wide
- typedef u8 ARMbyte; // must be 8 bits wide
- #define VFP_REG_NUM 64
- struct ARMul_State
- {
- ARMword Emulate; // To start and stop emulation
- // Order of the following register should not be modified
- ARMword Reg[16]; // The current register file
- ARMword Cpsr; // The current PSR
- ARMword Spsr_copy;
- ARMword phys_pc;
- ARMword Reg_usr[2];
- ARMword Reg_svc[2]; // R13_SVC R14_SVC
- ARMword Reg_abort[2]; // R13_ABORT R14_ABORT
- ARMword Reg_undef[2]; // R13 UNDEF R14 UNDEF
- ARMword Reg_irq[2]; // R13_IRQ R14_IRQ
- ARMword Reg_firq[7]; // R8---R14 FIRQ
- ARMword Spsr[7]; // The exception psr's
- ARMword Mode; // The current mode
- ARMword Bank; // The current register bank
- ARMword exclusive_tag; // The address for which the local monitor is in exclusive access mode
- ARMword exclusive_state;
- ARMword exclusive_result;
- ARMword CP15[CP15_REGISTER_COUNT];
- // FPSID, FPSCR, and FPEXC
- ARMword VFP[VFP_SYSTEM_REGISTER_COUNT];
- // VFPv2 and VFPv3-D16 has 16 doubleword registers (D0-D16 or S0-S31).
- // VFPv3-D32/ASIMD may have up to 32 doubleword registers (D0-D31),
- // and only 32 singleword registers are accessible (S0-S31).
- ARMword ExtReg[VFP_REG_NUM];
- /* ---- End of the ordered registers ---- */
- ARMword NFlag, ZFlag, CFlag, VFlag, IFFlags; // Dummy flags for speed
- unsigned int shifter_carry_out;
- // Add armv6 flags dyf:2010-08-09
- ARMword GEFlag, EFlag, AFlag, QFlag;
- ARMword TFlag; // Thumb state
- unsigned long long NumInstrs; // The number of instructions executed
- unsigned NumInstrsToExecute;
- unsigned NresetSig; // Reset the processor
- unsigned NfiqSig;
- unsigned NirqSig;
- unsigned abortSig;
- unsigned NtransSig;
- unsigned bigendSig;
- unsigned syscallSig;
- /* 2004-05-09 chy
- ----------------------------------------------------------
- read ARM Architecture Reference Manual
- 2.6.5 Data Abort
- There are three Abort Model in ARM arch.
- Early Abort Model: used in some ARMv3 and earlier implementations. In this
- model, base register wirteback occurred for LDC,LDM,STC,STM instructions, and
- the base register was unchanged for all other instructions. (oldest)
- Base Restored Abort Model: If a Data Abort occurs in an instruction which
- specifies base register writeback, the value in the base register is
- unchanged. (strongarm, xscale)
- Base Updated Abort Model: If a Data Abort occurs in an instruction which
- specifies base register writeback, the base register writeback still occurs.
- (arm720T)
- read PART B
- chap2 The System Control Coprocessor CP15
- 2.4 Register1:control register
- L(bit 6): in some ARMv3 and earlier implementations, the abort model of the
- processor could be configured:
- 0=early Abort Model Selected(now obsolete)
- 1=Late Abort Model selceted(same as Base Updated Abort Model)
- on later processors, this bit reads as 1 and ignores writes.
- -------------------------------------------------------------
- So, if lateabtSig=1, then it means Late Abort Model(Base Updated Abort Model)
- if lateabtSig=0, then it means Base Restored Abort Model
- */
- unsigned lateabtSig;
- // For differentiating ARM core emulaiton.
- bool is_v4; // Are we emulating a v4 architecture (or higher)?
- bool is_v5; // Are we emulating a v5 architecture?
- bool is_v5e; // Are we emulating a v5e architecture?
- bool is_v6; // Are we emulating a v6 architecture?
- bool is_v7; // Are we emulating a v7 architecture?
- // ARM_ARM A2-18
- // 0 Base Restored Abort Model, 1 the Early Abort Model, 2 Base Updated Abort Model
- int abort_model;
- // TODO(bunnei): Move this cache to a better place - it should be per codeset (likely per
- // process for our purposes), not per ARMul_State (which tracks CPU core state).
- std::unordered_map<u32, int> instruction_cache;
- };
- /***************************************************************************\
- * Types of ARM we know about *
- \***************************************************************************/
- enum {
- ARM_v4_Prop = 0x01,
- ARM_v5_Prop = 0x02,
- ARM_v5e_Prop = 0x04,
- ARM_v6_Prop = 0x08,
- ARM_v7_Prop = 0x10,
- };
- /***************************************************************************\
- * The hardware vector addresses *
- \***************************************************************************/
- enum {
- ARMResetV = 0,
- ARMUndefinedInstrV = 4,
- ARMSWIV = 8,
- ARMPrefetchAbortV = 12,
- ARMDataAbortV = 16,
- ARMAddrExceptnV = 20,
- ARMIRQV = 24,
- ARMFIQV = 28,
- ARMErrorV = 32, // This is an offset, not an address!
- ARMul_ResetV = ARMResetV,
- ARMul_UndefinedInstrV = ARMUndefinedInstrV,
- ARMul_SWIV = ARMSWIV,
- ARMul_PrefetchAbortV = ARMPrefetchAbortV,
- ARMul_DataAbortV = ARMDataAbortV,
- ARMul_AddrExceptnV = ARMAddrExceptnV,
- ARMul_IRQV = ARMIRQV,
- ARMul_FIQV = ARMFIQV
- };
- /***************************************************************************\
- * Mode and Bank Constants *
- \***************************************************************************/
- enum PrivilegeMode {
- USER32MODE = 16,
- FIQ32MODE = 17,
- IRQ32MODE = 18,
- SVC32MODE = 19,
- ABORT32MODE = 23,
- UNDEF32MODE = 27,
- SYSTEM32MODE = 31
- };
- enum {
- USERBANK = 0,
- FIQBANK = 1,
- IRQBANK = 2,
- SVCBANK = 3,
- ABORTBANK = 4,
- UNDEFBANK = 5,
- DUMMYBANK = 6,
- SYSTEMBANK = 7
- };
- /***************************************************************************\
- * Definitions of things in the emulator *
- \***************************************************************************/
- void ARMul_Reset(ARMul_State* state);
- ARMul_State* ARMul_NewState(ARMul_State* state);
- /***************************************************************************\
- * Definitions of things in the co-processor interface *
- \***************************************************************************/
- enum {
- ARMul_FIRST = 0,
- ARMul_TRANSFER = 1,
- ARMul_BUSY = 2,
- ARMul_DATA = 3,
- ARMul_INTERRUPT = 4,
- ARMul_DONE = 0,
- ARMul_CANT = 1,
- ARMul_INC = 3
- };
- /***************************************************************************\
- * Definitions of things in the host environment *
- \***************************************************************************/
- enum ConditionCode {
- EQ = 0,
- NE = 1,
- CS = 2,
- CC = 3,
- MI = 4,
- PL = 5,
- VS = 6,
- VC = 7,
- HI = 8,
- LS = 9,
- GE = 10,
- LT = 11,
- GT = 12,
- LE = 13,
- AL = 14,
- NV = 15,
- };
- // Flags for use with the APSR.
- enum : u32 {
- NBIT = (1U << 31U),
- ZBIT = (1 << 30),
- CBIT = (1 << 29),
- VBIT = (1 << 28),
- QBIT = (1 << 27),
- JBIT = (1 << 24),
- EBIT = (1 << 9),
- ABIT = (1 << 8),
- IBIT = (1 << 7),
- FBIT = (1 << 6),
- TBIT = (1 << 5),
- // Masks for groups of bits in the APSR.
- MODEBITS = 0x1F,
- INTBITS = 0x1C0,
- };
- // Values for Emulate.
- enum {
- STOP = 0, // Stop
- CHANGEMODE = 1, // Change mode
- ONCE = 2, // Execute just one iteration
- RUN = 3 // Continuous execution
- };
- bool AddOverflow(ARMword, ARMword, ARMword);
- bool SubOverflow(ARMword, ARMword, ARMword);
- void ARMul_SelectProcessor(ARMul_State*, unsigned);
- u32 AddWithCarry(u32, u32, u32, bool*, bool*);
- bool ARMul_AddOverflowQ(ARMword, ARMword);
- u8 ARMul_SignedSaturatedAdd8(u8, u8);
- u8 ARMul_SignedSaturatedSub8(u8, u8);
- u16 ARMul_SignedSaturatedAdd16(u16, u16);
- u16 ARMul_SignedSaturatedSub16(u16, u16);
- u8 ARMul_UnsignedSaturatedAdd8(u8, u8);
- u16 ARMul_UnsignedSaturatedAdd16(u16, u16);
- u8 ARMul_UnsignedSaturatedSub8(u8, u8);
- u16 ARMul_UnsignedSaturatedSub16(u16, u16);
- u8 ARMul_UnsignedAbsoluteDifference(u8, u8);
- u32 ARMul_SignedSatQ(s32, u8, bool*);
- u32 ARMul_UnsignedSatQ(s32, u8, bool*);
- bool InBigEndianMode(ARMul_State*);
- bool InAPrivilegedMode(ARMul_State*);
- u32 ReadCP15Register(ARMul_State* cpu, u32 crn, u32 opcode_1, u32 crm, u32 opcode_2);
- void WriteCP15Register(ARMul_State* cpu, u32 value, u32 crn, u32 opcode_1, u32 crm, u32 opcode_2);
|